You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

Resource Efficient Electrification (REE)

New engineering design means and methods are needed to enable and speed adoption of low carbon retrofit technologies. Efficient heating and cooling energy systems are widely available but are underused due to lack of knowledge and thermal system interaction. Decarbonization requires adapting distribution designed for legacy thermal supply to electric and renewable thermal energy systems. The solution is Resource Efficient Electrification (REE). This novel approach emerges from the Empire Building Challenge after one year of collaboration among real estate partners, industry-leading engineering consultants and the NYSERDA team. REE is a design strategy that can help alleviate space constraints issues, provide peak thermal capacity, optimize operational efficiencies, utilize waste heat, and reduce the need for oversized electrified thermal energy systems, which creates retrofit cost compression. It is a framework of building decarbonization tailored to cold climate tall buildings but that can be applied across New York’s, wide array of building types, vintages and systems. This approach incorporates strategic capital planning, an integrated design process, and an incremental, network-oriented approach to deliver building heating, cooling, and ventilation that:

  • Requires limited or no combustion,
  • Enables carbon neutrality,
  • Is highly efficient at low design temperatures and during extreme weather,
  • Is highly resilient, demand conscious, and energy grid-interactive,
  • Reduces thermal waste by capturing as many on-site or nearby thermal flows as possible, and
  • Incorporates realistic and flexible implementation strategies by optimizing and scheduling phase-in of low carbon retrofits .


Decarbonization Framework

Resource Efficient Electrification focuses on implementing enabling steps that keeps future optionality as technology and policy evolves. This framework allows the building owner or manager to take action now instead of waiting for better technology and potentially renewing a fossil-fueled powered energy system for another life cycle.

The figure below illustrates a conceptual framework for accomplishing these objectives and overcoming the barriers described here . Specific measures and sequencing will be highly bespoke for a given building, but engineers and their owner clients can use this bucketed framework to place actionable projects in context of an overarching decarbonization roadmap.

A Step-by-Step Process to Use REE to Advise Decarbonization Efforts: 

  1. Understanding a building's fossil fuel use in detail is a critical first step. Make an effort to understand when, where, how and why fossil fuels are being consumed at the building and under what outdoor temperature and weather conditions. Conduct a temperature BINS analysis to know how much fossil fuel is consumed during various temperature bands (typically in 5 or 10 degree increments) from design temperature up to the end of the heating season. Make an effort to understand cooling season usage patterns in detail. 
  2. While electrification is desirable to combat climate change, energy efficiency is just as important than ever. Reducing heating and cooling loads across all weather conditions is a major early step to achieve REE. 
  3. Draw a theoretical box around your building and identify the ways heat is being gained or lost. Hint: some places to look at are cooling towers, facades and windows, elevator machine rooms, through your sewer connection, or at your ventilation exhaust system. Cooling towers operating in the winter are an obvious energy wasting activity. Seek solutions to reduce, recover, and recycle or reuse, and store this heat. 
  4. After, or in parallel with the previous steps, begin to electrify the building heat load, starting with marginal "shoulder season" loads (spring and fall). Don't force electric heating technology such as air source heat pumps to operate during conditions for which they weren't designed. Optimize heat pump implementation through a "right sizing" thermal dispatch approach to avoid poor project economics and higher operating expense. This means you will continue to retain an auxiliary heating source for more extreme weather conditions until you are ready to fully eliminate fossil fuels from your building and before your targeted decarbonization date. This approach gives you time to identify the right peak period heating solution while allowing you to take action early and drive down emissions. Emissions reduced sooner are more valuable than emissions reduced in the future (learn more about the time value of carbon emissions)
  5. Remove your fossil fuel connection and meet your decarbonization deadline! 


Review

  • Disaggregate time-of-use profiles to identify heat waste and recovery opportunities and to right-size equipment
  • Thermal dispatch strategy: layering heat capacity to optimize carbon reduction and project economics

Reduce

  • Repair, upgrade and refresh envelopes
  • Optimize controls

Reconfigure

  • Eliminate or reduce inefficient steam and forced air distribution
  • Create thermal networks and enable heat recovery
  • Lower supply temperatures to ranges of optimal heat pump performance
  • Segregate and cascade supply temperatures based on end-use

Recover

  • Simultaneous heating and cooling in different zones of building
  • Eliminate “free cooling” economizer modes
  • Exhaust heat recovery; absorbent air cleaning
  • Building wastewater heat recovery
  • Municipal wastewater heat recovery
  • Steam condensate
  • Refrigeration heat rejection
  • Other opportunistic heat recovery and heat networking

Store

  • Store rejected heat from daytime cooling for overnight heating
  • Store generated heat— centrally, distributed, or in the building’s thermal inertia
  • Deploy advanced urban geothermal and other district thermal networking solutions
Building Systems Topology

Commercial office buildings offer significant heat recovery and storing opportunities due to simultaneous heating and cooling daily profiles. As a result, offices can heat themselves much of the year with heat recovery and storage.

Multifamily buildings typical daily profiles show efficiency opportunities that can lower and flatten system peaks. This can be achieved by a variety of heat reduction, recovery, and storing strategies​.

The thermal energy network approach enables transaction of thermal energy to increase overall system efficiency and reduce wasted heat. The concept can be applied at the building level (with floor-by-floor heat exchange), to groups of buildings, to whole neighborhoods, or to cities. Below is an illustration of a whole-system, thermal network approach applied in an urban environment to supply clean heat in cold-climate tall buildings:​

  • No labels