Page History

Section

Aura - Panel

tab

1

styles

{"body":{"text":{"color":"#465671","textAlign":"left","fontWeight":"normal","fontSize":14}},"header":{"backgroundColor":{"color":"#f2f8fa"}},"headline":{"alignment":{"horizontal":"start"},"text":{"text":"Quality and Market Standards Application","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":26}},"base":{"border":{"bottom":false,"left":true,"right":false,"top":false,"color":"#233e90","width":4,"style":"solid"},"backgroundColor":{"color":"#f2f8fa"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}

The Quality and Market Standards (QMS) module allows NYSERDA and contracted Quality Service Providers (QSPs) to identify projects that are eligible for field inspections. A random sampling of projects are selected for inspection to verify that program and technical requirements have been met. The QMS module allows inspectors to document evidence of any non-conformance through photos and written documentation. Information collected by the inspector is uploaded into the Salesforce QA checklist and an inspection report is generated. The QMS module allows the Contractor to submit corrective action documentation as needed and for the program implementer (either initiative staff or an external company providing support) to respond.

Audience: Participating Contractors

Aura - Tab Group

{"generalSettings":{"tabSpacing":0,"tabWidth":70,"tabHeight":40,"direction":"vertical"},"activeSettings#002d72textfontSize16,color#fffnormal}}inactiveSettings{backgroundColorcolor#f4f5f7textfontSize16,#5e6c84","textAlign":"left","fontWeight":"normal"}contentSettingsbackgroundColor{"color":"#fff"","is":"drop-shadow032-2}]},"border":{"style":"solid","width":2,"top":false,"bottom":false,"left":true,"right":false

Section

Panel

borderColor	#002D72
bgColor	#F3F4F9
titleColor	#ffffff
borderWidth	1
titleBGColor	#002D72
borderStyle	none
title	Process Overview

Info

icon	false

The diagram below outlines the QMS Process Steps for the complete inspection process. The standard inspection process is outlined in the All Inspections row. If an inspection requires Corrective Actions, this process is included in the Correct Action Required Path. Generally speaking, Inspections without major or critical non-conformances will typically end at the Review & Approve Inspection step in the All Inspections row. If there are any CAR Tasks, the process will include the Corrective Action Required Path.

Aura - Panel

tab	1
styles	{"body":{},"header

settings

":{"backgroundColor":{"color":"

#f3f4f9"}},"

headline":{"

text":

{"

text":"

Process Steps","color":"#002d72","textAlign":"left","fontWeight":"

bold"

,"

fontSize":

18},"

alignment":{"

horizontal":"

start"}},"

base":{"

backgroundColor":

{"color":"

#ffffff"},"

borderRadius":{"

radius":

4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)

","x":0,"y":

1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":

1,"blur":

3,"spread":

1}]}}}
body	<p><br /></p>

draw.io Diagram

border	false

diagramName	EAE - SQA Process
simpleViewer	false
width	1200
links	auto
tbstyle	hidden
diagramDisplayName
lbox	false
diagramWidth	782
revision	13

}padding{"top10right10bottom10,left10hoverSettings#0073a4textfontSize16,"#fffffftextAlignleftfontWeightnormal

Section

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Inspections","color":"#002d72"

,"

textAlign":

"left","fontWeight":

"bold","

fontSize":

18},"

alignment":

{"

horizontal":

"start"}},"

base":{"backgroundColor":{"color":"

#ffffff"},"

borderRadius":{"

radius":

4},"boxShadow":{"shadows":[{"color":"

rgba(0, 0, 0, 0.08)","

x":0,"

y":1,"

blur":1,"

spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}

tab

1

aura-tab

body	<p><br /></p>

Expand

title

Process Overview

learn more...

NYSERDA conducts a minimum of three field inspections for each new participating Contractor. New contractors who have not passed three inspections are listed as Provisional. When they are in good standing after these inspections, their status is updated to Full. After an installer receives Full status, NYSERDA reviews a random sample of projects for review. Contractors with a Probationary or Suspended status may have 100% of their projects inspected.

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Post Inspection Report"

Panel

borderColor	#002D72
bgColor	#F3F4F9
titleColor	#ffffff
borderWidth	1
titleBGColor	#002D72
borderStyle	none
title	Process Overview

Info

icon	false

The diagram below outlines the QMS Process Steps for the complete inspection process. The standard inspection process is outlined in the All Inspections row. If an inspection requires Corrective Actions, this process is included in the Correct Action Required Path. Generally speaking, Inspections without major or critical non-conformances will typically end at the Review & Approve Inspection step in the All Inspections row. If there are any CAR Tasks, the process will include the Corrective Action Required Path.

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Process Steps","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

drawio

Expand

border

false

diagramName

EAE - SQA Process

simpleViewer

false

width

1200

links

auto

tbstyle

hidden

diagramDisplayName

lbox

false

diagramWidth

782

revision

13

Aura - Tab

title	Process Details

Process Details

title	learn more...

Once an inspection has been completed and submitted by the Inspector, and is reviewed and approved by the QSP QA Manager, an Inspection Report is generated and appended to the Project Inspection Record. An email is systematically sent to the Contractor with a link to the Inspection Report.

Info

icon	false

Below are examples of the heading for an Inspection Report for both a passed and failed inspection. In an actual Inspection Report, below the Pass/Fail heading displays details on all aspects of the inspection results.

Image Added

Panel

borderColor

#002D72

bgColor

#F3F4F9

titleColor

#ffffff

borderWidth

1

titleBGColor

#002D72

borderStyle

none

title

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"InspectionsPost Inspection Report","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Expand

title	learn more...

NYSERDA conducts a minimum of three field inspections for each new participating Contractor. New contractors who have not passed three inspections are listed as Provisional. When they are in good standing after these inspections, their status is updated to Full. After an installer receives Full status, NYSERDA reviews a random sample of projects for review. Contractors with a Probationary or Suspended status may have 100% of their projects inspected.

Aura - Panel

styles
tab	1
tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Post Inspection ReportEmail Communications","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Expand

title	learn more...

Once an inspection has been completed and submitted by the Inspector, and is reviewed and approved by the QSP QA Manager, an Inspection Report is generated and appended to the Project Inspection Record. An email is systematically sent to the Contractor with a link to the Inspection Report.

Info

icon	false

Below are examples of the heading for an Inspection Report for both a passed and failed inspection. In an actual Inspection Report, below the Pass/Fail heading displays details on all aspects of the inspection results.

Image RemovedContractors receive email communication about QMS inspections. When an Inspector schedules a project for QMS, an email will be sent to the contractor with the inspection date, time, and address. NYSERDA automatically sends emails for cancelled and rescheduled inspections. The QSP QA Manager - the designated manager from the QSP QA agency - approves and distributes inspection reports to the project applicant. In rare instances a Contractor may not be notified of an upcoming inspection upon the customer’s request.

{"body":{},"header":{"backgroundColor":{"

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Email CommunicationsQuality Scoring","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Expand

title	learn more...

Contractors receive email communication about QMS inspections. When an Inspector schedules a project for QMS, an email will be sent to the contractor with the inspection date, time, and address. NYSERDA automatically sends emails for cancelled and rescheduled inspections. The QSP QA Manager - the designated manager from the QSP QA agency - approves and distributes inspection reports to the project applicant. In rare instances a Contractor may not be notified of an upcoming inspection upon the customer’s request.

Aura - Panel

tab

1

styles

The QMS Salesforce module assigns a Quality Score (on a scale of 1 to 5) based on the inspection results. This score will be provided in the Inspection report that is generated after the Inspector completes the inspection. NYSERDA provides Contractors a link to the inspection report through Salesforce.

SQA Quality Score

Quality Score Description

1 or 2

Signifies a Failed Inspection with major and/or critical non-conformances. The Contractor must provide evidence to NYSERDA that these non-conformances outlined in the Inspection Report were resolved. Inspections in this score range may also contain minor or incidental non-conformances that will still need resolution, though the Contractor is not required to provide evidence for these issues.

The inspection score may be updated if the Major and/or critical non-conformances are successfully contested

3, 4, or 5

Signifies a Passed Inspection with only minor or incidental non-conformances. The Contractor must correct these issues but is not required to provide evidence to NYSERDA.

Access the Portal Login Page.

Section

Quality Scoring

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"

Inspections","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

The QMS Salesforce module assigns a Quality Score (on a scale of 1 to 5) based on the inspection results. This score will be provided in the Inspection report that is generated after the Inspector completes the inspection. NYSERDA provides Contractors a link to the inspection report through Salesforce.

Expand

title	learn more...

SQA Quality Score

Quality Score Description

1 or 2

Signifies a Failed Inspection with major and/or critical non-conformances. The Contractor must provide evidence to NYSERDA that these non-conformances outlined in the Inspection Report were resolved. Inspections in this score range may also contain minor or incidental non-conformances that will still need resolution, though the Contractor is not required to provide evidence for these issues.

The inspection score may be updated if the Major and/or critical non-conformances are successfully contested

3, 4, or 5

Signifies a Passed Inspection with only minor or incidental non-conformances. The Contractor must correct these issues but is not required to provide evidence to NYSERDA.

NYSERDA conducts a minimum of three field inspections for each new participating Contractor. New contractors who have not passed three inspections are listed as Provisional. When they are in good standing after these inspections, their status is updated to Full. After an installer receives Full status, NYSERDA reviews a random sample of projects for review. Contractors with a Probationary or Suspended status may have 100% of their projects inspected.

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Post Inspection Report","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Expand

title	learn more...

Once an inspection has been completed and submitted by the Inspector, and is reviewed and approved by the QSP QA Manager, an Inspection Report is generated and appended to the Project Inspection Record. An email is systematically sent to the Contractor with a link to the Inspection Report.

Info

icon	false

Below are examples of the heading for an Inspection Report for both a passed and failed inspection. In an actual Inspection Report, below the Pass/Fail heading displays details on all aspects of the inspection results.

Image Added

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Post Inspection Report","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Email Communications","color":"

Aura - Tab

title	The NYSERDA Partner Portal

Panel

borderColor	#002D72
bgColor	#F3F4F9
titleColor	#ffffff
borderWidth	1
titleBGColor	#002D72
borderStyle	none
title	The NYSERDA Portal

Info
The Quality and Market Standards (QMS) module is built within the NYSERDA Partner Portal (Salesforce). All activity related to scheduling, conducting, reviewing and approving inspections, and managing corrective action responses and resolutions, is documented and managed from within Salesforce.

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Logging into the NYSERDA Partner Portal","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Expand

title	learn more...

UI Steps

size	small

UI Step

Expand

title	screenshot

Image Removed

UI Step

Enter your Username and Password and click Log In.

Your username is your email address through your organization with .nyserda added to the end as shown in the example screenshot below.

You created the password when accessing the NYSERDA Partner Portal the first time after receiving login information from NYSERDA. If you have forgotten the password, click the Forgot Your Password? Link and follow the prompts to reset your password.

Expand
Image Removed

Aura - Paneltab1styles{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Dashboard","color":"

#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Expand

title	learn more...

Info
The Dashboard page provides an overview of your projects and to the available reports for Contractors/Builders.

UI Steps

size	small

UI Step
After logging into Salesforce, click the Dashboards tab to access the Dashboard.

UI Step

The Dashboard includes several visual charts to help you track your projects.

Expand

title	screenshot

Image Removed

A If you have access to several dashboards, use the dropdown menu to navigate between them B Click Refresh to update the dashboards and display the most up-to-date information C Hover your mouse over any data elements in any graph to reveal a tooltip with granular details D Each chart in the Dashboard has an underlying report that can be accessed by clicking the chart Aura - Paneltab1styles{"body":{},"header":{"

Contractors receive email communication about QMS inspections. When an Inspector schedules a project for QMS, an email will be sent to the contractor with the inspection date, time, and address. NYSERDA automatically sends emails for cancelled and rescheduled inspections. The QSP QA Manager - the designated manager from the QSP QA agency - approves and distributes inspection reports to the project applicant. In rare instances a Contractor may not be notified of an upcoming inspection upon the customer’s request.

Reports

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"

Quality Scoring","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Expand

title	learn more...

The QMS Salesforce module assigns a Quality Score (on a scale of 1 to 5) based on the inspection results. This score will be provided in the Inspection report that is generated after the Inspector completes the inspection. NYSERDA provides Contractors a link to the inspection report through Salesforce.

SQA Quality Score

Quality Score Description

1 or 2

Signifies a Failed Inspection with major and/or critical non-conformances. The Contractor must provide evidence to NYSERDA that these non-conformances outlined in the Inspection Report were resolved. Inspections in this score range may also contain minor or incidental non-conformances that will still need resolution, though the Contractor is not required to provide evidence for these issues.

The inspection score may be updated if the Major and/or critical non-conformances are successfully contested

3, 4, or 5

Signifies a Passed Inspection with only minor or incidental non-conformances. The Contractor must correct these issues but is not required to provide evidence to NYSERDA.

aura

Section

Panel

borderColor	#002D72
bgColor	#F3F4F9
titleColor	#ffffff
borderWidth	1
titleBGColor	#002D72
borderStyle	none
title	The NYSERDA Portal

Info
The Quality and Market Standards (QMS) module is built within the NYSERDA Partner Portal (Salesforce). All activity related to scheduling, conducting, reviewing and approving inspections, and managing corrective action responses and resolutions, is documented and managed from within Salesforce.

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Logging into the NYSERDA Partner Portal","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Expand

title	learn more...

UI Steps

size	small

UI Step
Access the Portal Login Page

Info

icon	false

To access all of the reports available to Contractors/Builders, follow the instructions below.

UI Steps

size	small

UI Step
After logging into Salesforce, access the Dashboards tab.

UI Step
Then click the Go to Dashboard List link.

UI Step
Select the Program folder to access the report list. Once clicked, the reports will show to the right.

Below is a list of all reports available to Contractors/Builders.

After accessing a report, use the Filters at the top of the page to define how the information in the report should be displayed.

Image Removed

UI Step

Report Name

Description

Contractor Inspection Dashboard

High-level overview of completed inspections.

Photo Inspection Score

Overview of all photo inspection score over a set period of time.

2018 Inspection Scores*

List of all projects from 2018.

2019 Inspection Scores*

List of all projects from 2019.

Invoices by Payment Status**

Groups projects by invoice status and displays invoice amount.

Status and System Size*

Groups projects by project status and system size.

Waiting and Response*

Lists all projects that require input/response for process participants.

Number of Projects by Utility*

Groups projects by electric utility company.

Open Projects with Completion Deadline*

Lists all approved projects at risk for termination.

Inspection List

Lists all approved/completed field or photo inspection projects.

* Includes links to Project records
** Includes links to Project and Invoice records
*** Includes links to Project and Inspection records

UI Step

Expand

title	screenshot

Run Report

Click to update the report information based on the filters set.

Hide Details

Hides the details of each heading in the report table. Click again to unhide these details.

Printable View

Click to open the report in a print friendly format.

Export Details

Exports the report into an excel format.

UI Step

Click any Underlined Link in a report table to open the corresponding Project Record.

Expand

title	screenshot

Image RemovedImage Added

ui-step

Enter your Username and Password and click Log In.

Your username is your email address through your organization with .nyserda added to the end as shown in the example screenshot below.

You created the password when accessing the NYSERDA Partner Portal the first time after receiving login information from NYSERDA. If you have forgotten the password, click the Forgot Your Password? Link and follow the prompts to reset your password.

Expand
Image Added

tab

Section

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}

title	Responding to Corrective Actions

Panel

borderColor	#002D72
bgColor	#F3F4F9
titleColor	#ffffff
borderWidth	1
titleBGColor	#002D72
borderStyle	none
title	Responding to Corrective Action Required (CAR) Requests

Info

Corrective Action Required (CAR) tasks may be assigned to specific Measures or Tasks for an inspection. CARs, in general, highlight major or critical deficiencies of the installation or project.

Contractors/Builders who receive CAR tasks related to a prior inspection must resolve all Critical and Major failed tasks. This may require performing additional work on the build site to fix any documented issues. Once these issues have been resolved, Contractors/Builders should follow the following process to update the inspection record.

Contractors and Builders respond to Corrective Action Required (CAR) tasks through the Review Failed Tasks page in Salesforce. Access to this page can be found in the email communication sent to Contractors and Builders when an inspection uncovers CARs.

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Resolving Corrective Actions (CARs)Logging into the NYSERDA Partner Portal","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Expand

title	learn more...

UI Steps

size	small

UI Step

Expand

title	screenshot

Image Removed

UI Step

On the Review Failed Tasks page, use the side navigation bar to locate all CAR eligible failed tasks. Major or Critical failed tasks that require a response are denoted with a Red X to the right of the task. The first failed task will already be visible.

Expand

title	screenshot

Image Removed

UI Step

For each CAR eligible failed task, click the Action dropdown list and select Mark as Resolved, then add a note in the Notes section. Finally, click Insert to update the failed task and open the attachment window.

Expand

title	screenshot

Image Removed

Warning
Note that an Action must be selected, and Notes documented before you are able to click the Insert option to upload new files or photos. Additionally, the Mark as Resolved option is only available for Major or Critical failed tasks. Given that Minor or Incidental failed tasks do not require a response to NYSERDA if resolved, that option is not available.

UI Step

In the Attachment column, click the Paperclip icon to open the CAR Failure Review Attachment window.

Expand

title	screenshot

Image Removed

UI Step

Click Choose Files in the new window to locate the files on your computer. Choose the appropriate file(s) for upload.

Expand

title	screenshot

Image Removed

Tip

icon	false

Multiple files or photos can be uploaded at the same time. Simply select multiple files or photos during Step three of this section.

UI Step
After a file is uploaded, a thumbnail of the file will display in the Attachment window. Click the Close button when complete.

UI Step
After successfully responding to all Failed tasks, click Submit at the bottom of the page to submit your CAR replies for review.

UI Step
After resolving the CAR tasks, the Program Implementer will review the submitted resolution. If the resolution is approved, no further actions are necessary for that specific CAR tasks. If the resolution is denied, the Program Implemented will reach out to request additional corrections.

UI StepComplete the above steps for all other CAR tasks.

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Dashboard","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Expand

title	learn more...

Info
The Dashboard page provides an overview of your projects and to the available reports for Contractors/Builders.

UI Steps

size	small

UI Step
After logging into Salesforce, click the Dashboards tab to access the Dashboard.

UI Step

The Dashboard includes several visual charts to help you track your projects.

Expand

title	screenshot

Image Added

A	If you have access to several dashboards, use the dropdown menu to navigate between them
B	Click Refresh to update the dashboards and display the most up-to-date information
C	Hover your mouse over any data elements in any graph to reveal a tooltip with granular details
D	Each chart in the Dashboard has an underlying report that can be accessed by clicking the chart

Section

The NYSERDA Partner Portal

expand

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Contesting Corrective Actions (CARs)",Dashboard","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Aura - Panel

title	learn more...

Info
To contest a failed task, follow step 1 and step 2 from the Resolving Corrective Actions (CARs) section on this page, then:

UI Steps

size	small

UI Step
To contest a failed task, select Contest Rating from the Action dropdown list.

UI Step

Follow all additional steps from the Resolving Corrective Actions (CARs) section until all CARs have been resolved or contested.

Contractors are still required to resolve any failed tasks if the Program Manager denies the contest.
If the Program Implementer marks a Contest Failed Task as upheld, it will be escalated to the NYSERDA QA Manager.

UI Step

Contested Failed Tasks that are upheld by the Program Implemented are escalated to the NYSERDA QA Manager who will also perform a review and either deny or uphold the contested failed task.

Contractors are still required to resolve any failed tasks if the NYSERDA QA Manager denies the contest.
Contractors will receive a follow-up notification email regarding the CAR tasks and must respond by the Respond By date in the notification.
Failed tasks can only be contested twice.

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Reports","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Expand

title	learn more...

Info

icon	false

To access all of the reports available to Contractors/Builders, follow the instructions below.

UI Steps

size	small

UI Step
After logging into Salesforce, access the Dashboards tab.

UI Step
Then click the Go to Dashboard List link.

UI Step
Select the Program folder to access the report list. Once clicked, the reports will show to the right.

UI Step

Below is a list of all reports available to Contractors/Builders.

Report Name	Description
Contractor Inspection Dashboard	High-level overview of completed inspections.
Photo Inspection Score	Overview of all photo inspection score over a set period of time.
2018 Inspection Scores*	List of all projects from 2018.
2019 Inspection Scores*	List of all projects from 2019.
Invoices by Payment Status**	Groups projects by invoice status and displays invoice amount.
Status and System Size*	Groups projects by project status and system size.
Waiting and Response*	Lists all projects that require input/response for process participants.
Number of Projects by Utility*	Groups projects by electric utility company.
Open Projects with Completion Deadline*	Lists all approved projects at risk for termination.
Inspection List	Lists all approved/completed field or photo inspection projects.

* Includes links to Project records Includes links to Project and Invoice records * Includes links to Project and Inspection records

UI Step

After accessing a report, use the Filters at the top of the page to define how the information in the report should be displayed.

Expand

title	screenshot

Image Added

Run Report	Click to update the report information based on the filters set.
Hide Details	Hides the details of each heading in the report table. Click again to unhide these details.
Printable View	Click to open the report in a print friendly format.
Export Details	Exports the report into an excel format.

UI Step

Click any Underlined Link in a report table to open the corresponding Project Record.

Expand

title	screenshot

Image Added

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Reports","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Section

The NYSERDA Partner Portal

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Dashboard","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Reports","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Expand

title	learn more...

Info

icon	false

To access all of the reports available to Contractors/Builders, follow the instructions below.

UI Steps

size	small

UI Step
After logging into Salesforce, access the Dashboards tab.

UI Step
Then click the Go to Dashboard List link.

UI Step
Select the Program folder to access the report list. Once clicked, the reports will show to the right.

UI Step

Below is a list of all reports available to Contractors/Builders.

Report Name	Description
Contractor Inspection Dashboard	High-level overview of completed inspections.
Photo Inspection Score	Overview of all photo inspection score over a set period of time.
2018 Inspection Scores*	List of all projects from 2018.
2019 Inspection Scores*	List of all projects from 2019.
Invoices by Payment Status**	Groups projects by invoice status and displays invoice amount.
Status and System Size*	Groups projects by project status and system size.
Waiting and Response*	Lists all projects that require input/response for process participants.
Number of Projects by Utility*	Groups projects by electric utility company.
Open Projects with Completion Deadline*	Lists all approved projects at risk for termination.
Inspection List	Lists all approved/completed field or photo inspection projects.

* Includes links to Project records Includes links to Project and Invoice records * Includes links to Project and Inspection records

UI Step

After accessing a report, use the Filters at the top of the page to define how the information in the report should be displayed.

Expand

title	screenshot

Image Added

Run Report	Click to update the report information based on the filters set.
Hide Details	Hides the details of each heading in the report table. Click again to unhide these details.
Printable View	Click to open the report in a print friendly format.
Export Details	Exports the report into an excel format.

UI Step

Click any Underlined Link in a report table to open the corresponding Project Record.

Expand

title	screenshot

Image Added

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Reports","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Section

Responding to Corrective Actions

Panel

borderColor	#002D72
bgColor	#F3F4F9
titleColor	#ffffff
borderWidth	1
titleBGColor	#002D72
borderStyle	none
title	Responding to Corrective Action Required (CAR) Requests

Info

Corrective Action Required (CAR) tasks may be assigned to specific Measures or Tasks for an inspection. CARs, in general, highlight major or critical deficiencies of the installation or project.

Contractors/Builders who receive CAR tasks related to a prior inspection must resolve all Critical and Major failed tasks. This may require performing additional work on the build site to fix any documented issues. Once these issues have been resolved, Contractors/Builders should follow the following process to update the inspection record.

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Resolving Corrective Actions (CARs)","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

Expand

title	learn more...

UI Steps

size	small

UI Step

Contractors and Builders respond to Corrective Action Required (CAR) tasks through the Review Failed Tasks page in Salesforce. Access to this page can be found in the email communication sent to Contractors and Builders when an inspection uncovers CARs.

Expand

title	screenshot

Image Added

UI Step

On the Review Failed Tasks page, use the side navigation bar to locate all CAR eligible failed tasks. Major or Critical failed tasks that require a response are denoted with a Red X to the right of the task. The first failed task will already be visible.

Expand

title	screenshot

Image Added

UI Step

For each CAR eligible failed task, click the Action dropdown list and select Mark as Resolved, then add a note in the Notes section. Finally, click Insert to update the failed task and open the attachment window.

Expand

title	screenshot

Image Added

Warning
Note that an Action must be selected, and Notes documented before you are able to click the Insert option to upload new files or photos. Additionally, the Mark as Resolved option is only available for Major or Critical failed tasks. Given that Minor or Incidental failed tasks do not require a response to NYSERDA if resolved, that option is not available.

UI Step

In the Attachment column, click the Paperclip icon to open the CAR Failure Review Attachment window.

Expand

title	screenshot

Image Added

UI Step

Click Choose Files in the new window to locate the files on your computer. Choose the appropriate file(s) for upload.

Expand

title	screenshot

Image Added

Tip

icon	false

Multiple files or photos can be uploaded at the same time. Simply select multiple files or photos during Step three of this section.

UI Step
After a file is uploaded, a thumbnail of the file will display in the Attachment window. Click the Close button when complete.

UI Step
After successfully responding to all Failed tasks, click Submit at the bottom of the page to submit your CAR replies for review.

UI Step
After resolving the CAR tasks, the Program Implementer will review the submitted resolution. If the resolution is approved, no further actions are necessary for that specific CAR tasks. If the resolution is denied, the Program Implemented will reach out to request additional corrections.

UI Step
Complete the above steps for all other CAR tasks.

Aura - Panel

tab	1
styles	{"body":{},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Resolving Corrective Actions (CARs)","color":"#002d72","textAlign":"left","fontWeight":"bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

{"body":{"text":{"color":"#465671","textAlign":"left","fontWeight":"normal","fontSize":14}Training Videonormal,"boxShadow":{"shadows":[0810},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}

Aura - Panel

tab	1
styles	{"body":{

Aura - Tab

title	Training Resources

Panel

borderColor	#002D72
bgColor	#F3F4F9
titleColor	#ffffff
borderWidth	1
titleBGColor	#002D72
borderStyle	none
title	Training Resources

Aura - Panel

tab

1

styles

},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"

Contesting Corrective Actions (CARs)","color":"#002d72","textAlign":"left","fontWeight":"

bold","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"borderRadius":{"radius":4}

,"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.

16)","x":0,"y":1,"blur":

3,"spread":

body

1}]}}}
body	<p><br /></p>

Expand

title	learn more...

Info
To contest a failed task, follow step 1 and step 2 from the Resolving Corrective Actions (CARs) section on this page, then:

UI Steps

size	small

UI Step
To contest a failed task, select Contest Rating from the Action dropdown list.

UI Step

Follow all additional steps from the Resolving Corrective Actions (CARs) section until all CARs have been resolved or contested.

Contractors are still required to resolve any failed tasks if the Program Manager denies the contest.
If the Program Implementer marks a Contest Failed Task as upheld, it will be escalated to the NYSERDA QA Manager.

UI Step

Contested Failed Tasks that are upheld by the Program Implemented are escalated to the NYSERDA QA Manager who will also perform a review and either deny or uphold the contested failed task.

Contractors are still required to resolve any failed tasks if the NYSERDA QA Manager denies the contest.
Contractors will receive a follow-up notification email regarding the CAR tasks and must respond by the Respond By date in the notification.
Failed tasks can only be contested twice.

Section

Training Resource

The video below is a recording of the training session provided to Participating Contractors on January 26, 2022. Click the Play button on the video to being watching the recording. You can also click the full window icon in the lower-right hand corner to open the video in full-screen mode.

100%

Panel

borderColor	#002D72
bgColor	#F3F4F9
titleColor	#ffffff
borderWidth	1
titleBGColor	#002D72
borderStyle	none
title	Training Resources

Expand

title	watch video

Multimedia

name

NYSERDA Standards and Quality Assurance (SQA) Training for Contractors Session 3.mp4

width

100%

page

PUBLIC:COPY External Guide Video Library

height

Presentation

Aura - Panel

tab	1
styles	{"body":{"text":{"color":"#465671","textAlign":"left","fontWeight":"normal","fontSize":14}},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Training

Video","color":"#002d72","textAlign":"left","fontWeight":"normal","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

The

below presentation was used during the live

video below is a recording of the training session provided to Participating Contractors

. To read through the presentation, click once to open in full-screen mode, then scroll down to review additional slides. Do not use the arrows to the right and left after opening the presentation

on January 26, 2022. Click the Play button on the video to being watching the recording. You can also click the full window icon in the lower-right hand corner to open the video in full-screen mode

as it will navigate to other attachments on this page

.

view-file

Expand

title	watch video

Multimedia

review presentation

name

RES SQA Training Presentation - Participating Contractors.pdf

NYSERDA Standards and Quality Assurance (SQA) Training for Contractors Session 3.mp4
width	100%
page	COPY External Guide

Attachment Library

space

PUBLIC

height

250

QMS Home

Video Library
height	100%

Aura - Panel

tab	1
styles	{"body":{"text":{"color":"#465671","textAlign":"left","fontWeight":"normal","fontSize":14}},"header":{"backgroundColor":{"color":"#f3f4f9"}},"headline":{"text":{"text":"Training Presentation","color":"#002d72","textAlign":"left","fontWeight":"normal","fontSize":18},"alignment":{"horizontal":"start"}},"base":{"backgroundColor":{"color":"#ffffff"},"boxShadow":{"shadows":[{"color":"rgba(0, 0, 0, 0.08)","x":0,"y":1,"blur":1,"spread":0},{"color":"rgba(0, 0, 0, 0.16)","x":0,"y":1,"blur":3,"spread":1}]}}}
body	<p><br /></p>

The below presentation was used during the live training session to Participating Contractors. To read through the presentation, click once to open in full-screen mode, then scroll down to review additional slides. Do not use the arrows to the right and left after opening the presentation in full-screen mode as it will navigate to other attachments on this page.

Expand

title	review presentation

View file

name	RES SQA Training Presentation - Participating Contractors.pdf
page	COPY External Guide Attachment Library
height	250

QMS Home

HTML
<script type="text/javascript" > jQuery(document).ajaxComplete(function() { if(jQuery('.ia-fixed-sidebar.collapsed').length == 0 ) { jQuery('.expand-collapse-trigger').click(); }; }); </script>

HTML<style type="text/css"> .aura-tab-content { margin-top: 0px!important; padding-top: 0px!important; } .aura-panel { margin-top: 0px!important; margin-left: 0px!important; margin-right: 0px!important; } .panel, .alertPanel, .infoPanel { margin-top: 0px!important; } .panelHeader { font-size: 20px; padding-top: 5px!important; padding-bottom: 5px!important; } .panelContent { display: none; } .aura-body { padding-top: 10px!important; padding-left:10px!important; padding-right:10px!important; padding-bottom:10px!important; } .aura-header { padding-top:10px!important; padding-left:10px!important; padding-right:10px!important; } .aura-headline { padding-bottom:10px!important; } #title-text { display: none; } </style>

Space shortcuts

Versions Compared

Old Version 1

New Version Current

Key